Huski 4SDK4 250hr Service Pack
The 250-hour service for a Huski 4SDK4 skid steer loader is an essential maintenance interval designed to maintain the machine's efficiency and prevent future mechanical issues. This service generally includes several key inspections, fluid changes, and replacements. Here’s a comprehensive checklist for what typically is included in a 250-hour service:
250-Hour Service Checklist:
- Engine Oil and Filter Change: Replace the engine oil and oil filter to remove contaminants that can wear down the engine components.
- Fuel Filter Replacement: Change the fuel filter to ensure optimal fuel flow and to protect the engine from impurities that could clog injectors.
- Air Filter Inspection: Check the air filter for dirt and debris; clean or replace if necessary to ensure adequate air flow to the engine, which is crucial for maintaining power and efficiency.
- Hydraulic Oil Filter Replacement: Change the hydraulic oil filter to keep the hydraulic system running smoothly by preventing contaminants from damaging hydraulic components.
- Coolant Level Check: Verify that the coolant level is adequate, and inspect the cooling system for leaks or signs of wear to prevent overheating and engine damage.
- Transmission Fluid and Filter Check: If the machine uses a separate transmission fluid system, check and top up the fluid, and replace the filter if necessary.
- Tire Inspection and Pressure Adjustment: Ensure that tires are properly inflated and check for wear or damage. Correct tire pressure and condition are essential for safety and efficient operation.
- Grease and Lubrication: Lubricate all necessary moving parts including bearings, joints, and pivot points. This helps to reduce friction and wear, extending the life of these components.
- Battery Inspection: Test the battery and clean the terminals to ensure reliable starts and operation. Check for signs of corrosion and ensure the connections are secure.
- Brake System Check: Inspect the brakes for wear and proper function. Adjustments may be necessary to ensure reliable stopping power.
- Safety Systems Check: Verify that all safety features, including lights, alarms, and operator presence systems, are functioning properly.
- General Inspection: Conduct a thorough inspection of the entire machine for any signs of leaks, wear, or damage. This includes checking the undercarriage, attachment points, and hydraulic hoses.
- Belts and Hoses Inspection: Examine all belts and hoses for cracks or signs of wear and replace as necessary to prevent failures.
250-Hour Service Pack Items Huski 4SDK4
1 x Oil Filter C8036
1 x Fuel Filter F5207
1 x Inline Fuel Filter FS7909
1 x Air Filter FAS54123
1 x Hydraulic A411G15
Fluids Required (not supplied)
ISO 68 Hydraulic Fluid
Diesel Engine Oil 15w 40
Extended Life Coolant (ELC)
These lists provide a general guide and should be adapted based on the manufacturer's specific recommendations, as found in the service manual. To ensure your Huski 4SDK4 operates optimally, always use genuine parts and follow the recommended service intervals and procedures as closely as possible. If you do not have access to a manual or require specific part numbers, contacting a dealer or the manufacturer directly will be beneficial. They can provide tailored advice and ensure you have the most accurate information for maintaining your equipment.